Before you begin installing artificial turf, you must prepare the worksite to ensure that it is free of debris. Clear away existing landscaping, remove any stones, bushes, and other debris to create a clear pathway for the turf. Then, excavate the area to be covered and fill it with class-2 road base. Use a vibratory plate compactor to compact the base. Leave 3/4 inches of space between the base and the edge of the hardscape. If you cannot use a vibratory plate compactor, use a hand tamp to compact hard-to-reach areas.

After preparing the area, cut the turf at 0.6 to 0.7 centimeters from the edges of the walls, sidewalks, and other elements to avoid them from being damaged during the installation process. Use 6″ galvanized nails for this purpose. For the edges of the artificial grass, use landscape spikes or sod staples. Once the turf has been laid, make sure to backfill the trench with landscape gravel, mulch, or decorative rock.

artificial turf Sydney

It is necessary to install a base material that will allow the turf to drain up to 30 inches of water per hour. The best base material is crushed drain rock that is 3/4 inch in diameter. You can find crushed drain rock at your local rock yard. There are many names for crushed stone, including breeze rock, decomposed granite, and crusher fine gravel. It is important to use the right type of rock for the artificial turf installation, because some rocks are well-rounded and will not compact well.

The average artificial grass installation process takes about five to twelve hours. It is possible for a handyman to do it on a small area, such as a backyard. Larger areas require more grass and seaming, and this can be a daunting task for inexperienced landscapers. However, you can rent specialized tools for this project if you know what you are doing. In addition, you can also hire a landscaper if you are unsure of how to install artificial grass.

If the price of artificial turf installation is over $10/sq. ft., you should think twice. For example, if the price quoted is only $10 for a 1,000-square-foot installation, it’s likely to be of poor quality. It should include top-quality materials made in the United States, a dedicated construction manager, and a professional synthetic turf designer. You should also be aware that many companies factor in their profit share, which can range anywhere from ten to forty percent.

To install artificial turf, you should prepare the surface beforehand. First, remove any vegetation in the area. If you can’t remove it yourself, rent or borrow a sod cutter. Make sure you have sufficient room for the turf, or else you may end up with a mess on your hands. After this, use a chalk line to mark the roll where you want to install the turf. This will help ensure that the turf installation goes smoothly.